Adds a new UL-SCH transport channel with the given subframe assignment and transmission configuration. All parameters except the subframe list are optional and use their preset defaults when omitted.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:ULINk:CONFig:ULSCh "<string>"
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:ULINk:CONFig:ULSCh "3;0;0;50;0,0;N/A;N/A;N/A;N/A;0;0;0;0"
Notes	The argument is a positional, semicolon-separated string of 13 fields (no keys): subframe;modType;allocType;rbSize;rbOffset;S0;S1-1;S2;S3-1;nDMRS1;nDMRS2;deltaSS;hopping subframe – uplink subframe number (required) modType – 0 = QPSK, 1 = QAM16, 2 = QAM64 allocType – 0 = Type 0, 1 = Type 1 rbSize – number of resource blocks, 1–100 (Type 0 only; use N/A for Type 1) rbOffset – resource-block offset(s) off0,off1, 0–99 (Type 0 only; N/A for Type 1) S0, S1-1, S2, S3-1 – cluster RBG indices (Type 1 only; N/A for Type 0) nDMRS1, nDMRS2 – DMRS cyclic-shift values deltaSS – delta sequence-shift hopping – 0 = Off, 1 = Group, 2 = Sequence All fields except subframe are optional; omitted trailing fields use preset defaults. Use N/A for fields not applicable to the selected allocation type.
Preset	N/A
State Saved	Yes
Initial S/W Revision	A.20.01

Reconfigure UL-SCH

Reconfigures an already-added UL-SCH transport channel. Equivalent to opening the UL-SCH Config dialog on an existing channel and clicking OK.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:ULINk:TCHannel:EDIT "<string>"
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:ULINk:TCHannel:EDIT "0;4;1;0;50;0,0;N/A;N/A;N/A;N/A;0;0;0;0"
Notes	The argument is a positional, semicolon-separated string whose first field is the channel index (0-based), followed by the same 13 fields as Configure UL-SCH: channelIdx;subframe;modType;allocType;rbSize;rbOffset;S0;S1-1;S2;S3-1;nDMRS1;nDMRS2;deltaSS;hopping channelIdx – 0-based index of the UL-SCH to reconfigure (required) subframe – uplink subframe number modType – 0 = QPSK, 1 = QAM16, 2 = QAM64 allocType – 0 = Type 0, 1 = Type 1 rbSize – number of resource blocks, 1–100 (Type 0 only; N/A for Type 1) rbOffset – resource-block offset(s) off0,off1, 0–99 (Type 0 only; N/A for Type 1) S0, S1-1, S2, S3-1 – cluster RBG indices (Type 1 only; N/A for Type 0) nDMRS1, nDMRS2 – DMRS cyclic-shift values deltaSS – delta sequence-shift hopping – 0 = Off, 1 = Group, 2 = Sequence All fields except channelIdx and subframe are optional; omitted trailing fields use preset defaults. Use N/A for fields not applicable to the selected allocation type.
Preset	N/A
State Saved	Yes
Initial S/W Revision	A.20.01

Delete UL-SCH

Deletes the specified UL-SCH transport channel. The channel index is 1-based and refers to the position of the UL-SCH in the transport channel list.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:ULINk:TCHannel:DELete:ULSCh <integer>
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:ULINk:TCHannel:DELete:ULSCh 1
Notes	All TX instances belonging to the deleted channel are removed.
Preset	N/A
State Saved	Yes
Initial S/W Revision	A.20.01

General

Transport Channel Number

Query only

Displays the identifying number of this UL-SCH transport channel. The number is assigned automatically based on the channel's position in the list.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:ULSCh<n>:NUMBer?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier:UL:TCH:ULSCh:NUMBer?
Preset	1
State Saved	No
Initial S/W Revision	A.20.01

State

Enables or disables this UL-SCH transport channel instance.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:ULSCh<n>:STATe ON\|OFF\|1\|0 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:ULSCh<n>:STATe?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:ULSCh:STATe ON RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:ULSCh:STATe?
Preset	On
State Saved	Yes
Initial S/W Revision	A.20.01

Power

Sets the UL-SCH power relative to the total carrier power.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:ULSCh<n>:POWer <value> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:ULSCh<n>:POWer?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:ULSCh:POWer 0 RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:ULSCh:POWer?
Preset	0 dB
State Saved	Yes
Min	-60
Max	20
Initial S/W Revision	A.20.01

RNTI

Sets the Radio Network Temporary Identifier for this UL-SCH channel.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:ULSCh<n>:RNTI <value> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:ULSCh<n>:RNTI?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:ULSCh:RNTI 1 RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:ULSCh:RNTI?
Preset	1
State Saved	Yes
Min	0
Max	65535
Initial S/W Revision	A.20.01

Physical Channels

Query only

Displays the number(s) of the physical channel(s) associated with the selected transport channel.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:ULSCh<n>:PCH?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:ULSCh:PCH?
Preset	1-6
State Saved	No
Initial S/W Revision	A.20.01

Coding State

Query only

This setting is always Off in Basic TDD.

Transport channel coding is not available in the Basic LTE Carrier.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:ULSCh<n>:CODing:STATe?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:ULSCh:CODing:STATe?
Preset	Off
State Saved	No
Initial S/W Revision	A.20.01

Data

Select PN9, PN15, or User Defined Bits to use for the data.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:ULSCh<n>:DATA PN9\|PN15\|USER [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:ULSCh<n>:DATA?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:ULSCh:DATA PN9 RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:ULSCh:DATA?
Preset	PN9
State Saved	Yes
Initial S/W Revision	A.20.01

Data User Defined

Sets the user-defined bit pattern when Data is set to User Defined Bits.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:ULSCh<n>:DATA:USER "<bitstring>" [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:ULSCh<n>:DATA:USER?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:ULSCh:DATA:USER "00000000" RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:ULSCh:DATA:USER?
Notes	Active when Data is set to User Defined Bits.
Preset	"00000000"
State Saved	Yes
Initial S/W Revision	A.20.01

UL CoMP Settings

UL CoMP State

Turns the UL CoMP state on or off.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:ULSCh<n>:COMP[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:ULSCh<n>:COMP[:STATe]?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:ULSCh:COMP:STATe ON RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:ULSCh:COMP:STATe?
Notes	When UL CoMP State is On, PUSCH ID and DMRS PUSCH CSH ID are available to set a value. Otherwise, these parameters are not available to set a value as read-only.
Preset	Off
State Saved	Yes
Initial S/W Revision	A.20.01

PUSCH ID

Sets a value of PUSCH Identity (ID) which is used for virtual cell ID.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:ULSCh<n>:COMP:ID:PUSCh <value> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:ULSCh<n>:COMP:ID:PUSCh?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:ULSCh:COMP:ID:PUSCh "0" RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:ULSCh:COMP:ID:PUSCh?
Range	0 to 509.
Dependencies	When UL CoMP State is On, this parameter is available to set a value. Otherwise, this parameter is not available to set a value as read-only.
Preset	0
State Saved	Yes
Min	0
Max	509
Initial S/W Revision	A.20.01

DMRS PUSCH CSH ID

Sets a value which is used in initialization of cyclic shift hopping of DMRS PUSCH pseudo random sequence generation which is used for virtual cell ID.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:ULSCh<n>:COMP:ID:DMRS <value> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:ULSCh<n>:COMP:ID:DMRS?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:ULSCh:COMP:ID:DMRS "0" RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:ULSCh:COMP:ID:DMRS?
Range	0 to 509
Dependencies	When UL CoMP State is On, this parameter is available to set a value. Otherwise this parameter is not available to set a value as read-only.
Preset	"---"
State Saved	Yes
Min	0
Max	509
Initial S/W Revision	A.20.01

UCI (Uplink Control Information)

The UCI (Uplink Control Information) transport channel carries uplink control information via the PUCCH (Physical Uplink Control Channel). UCI includes HARQ-ACK, scheduling requests, and channel state information.

Configure UCI

Adds a new UCI transport channel with the given subframe assignment and PUCCH format. All parameters except the subframe list are optional and use preset defaults when omitted.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:ULINk:CONFig:UCI "<string>"
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:ULINk:CONFig:UCI "0;3,7;1;0;0;0;0;0;1;0"
Notes	The argument is a positional, semicolon-separated string of 10 fields (no keys): frame;subframe;format;N_RB(2);N_CS(1);nPUCCH1;nPUCCH2;nPUCCH3;deltaShift;hopping frame – radio frame number subframe – uplink subframe number(s), comma-separated list, e.g. 3,7 (required) format – PUCCH format index: 0 = Format 1, 1 = Format 1a, 2 = Format 1b, 3 = Format 2, 4 = Format 2a, 5 = Format 2b, 6 = Format 3 N_RB(2) – n_RB(2), number of RBs available for Format 2 N_CS(1) – n_CS(1), number of cyclic shifts for Format 1 nPUCCH1 – nPUCCH(1) resource index nPUCCH2 – nPUCCH(2) resource index nPUCCH3 – nPUCCH(3) resource index(es), dot-separated list deltaShift – delta-shift (Δshift PUCCH) hopping – 0 = Off, 1 = Group, 2 = Sequence All fields except subframe are optional; omitted trailing fields use preset defaults.
Preset	N/A
State Saved	Yes
Initial S/W Revision	A.20.01

Delete UCI

Deletes the UCI transport channel at the specified 1-based index. All TX instances belonging to that channel are removed.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:ULINk:TCHannel:DELete:UCI <integer>
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:ULINk:TCHannel:DELete:UCI 1
Preset	N/A
State Saved	Yes
Initial S/W Revision	A.20.01

General

Transport Channel Number

Query only

Displays the identifying number of this UCI transport channel. The number is assigned automatically based on the channel's position in the list.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:UCI<n>:NUMBer?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier:UL:TCH:UCI:NUMBer?
Preset	N/A
State Saved	No
Initial S/W Revision	A.20.01

State

Turns the channel On or Off.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:UCI<n>[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:UCI<n>:[:STATe]?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:UCI1:STATe ON RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:UCI1:STATe?
Preset	On
State Saved	Yes
Initial S/W Revision	A.20.01

Power

Enter a power level, in dB for the selected channel.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:UCI<n>:POWer <value> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:UCI<n>:POWer?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:UCI1:POWer 0 RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:UCI1:POWer?
Preset	0.000 dB
State Saved	Yes
Min	-60
Max	20
Initial S/W Revision	A.20.01

RNTI

Sets a value for the Radio Network Temporary Identifier (RNTI).

See 3GPP TS 36.211 and 36.321 for more information.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:UCI<n>:RNTI <value> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:UCI<n>:RNTI?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:UCI1:RNTI 1 RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:UCI1:RNTI?
Preset	1
State Saved	Yes
Min	0
Max	65535
Initial S/W Revision	A.20.01

Physical Channels

Query only

Displays the number(s) of the physical channel(s) associated with this UCI transport channel.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:UCI<n>:PCH?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier:UL:TCH:UCI:PCH?
Preset	N/A
State Saved	No
Initial S/W Revision	A.20.01

Coding State

Query only

Displays the coding state for the selected channel.

This setting is always off as Transport channel coding is not available in the Basic LTE Carrier. Use the Advanced LTE Carrier to configure a signal with transport channel coding.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:UCI<n>:CODing[:STATe]?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:UCI1:CODing:STATe?
Preset	Off
State Saved	No
Initial S/W Revision	A.20.01

UL CoMP Settings

UL CoMP State

Turns UL CoMP on or off.

When On, the PUCCH ID setting becomes available.

See 3GPP TS 36.211 and 36.311 for more information.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:UCI<n>:COMP[:STATe] ON\|OFF\|1\|0 [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:UCI<n>:COMP[:STATe]?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:UCI:COMP:STATe OFF RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:UCI:COMP:STATe?
Preset	Off
State Saved	Yes
Initial S/W Revision	A.20.01

PUCCH ID

Sets a value for the PUCCH Identity (ID) used as the virtual cell ID for UL CoMP.

See 3GPP TS 36.211 and 36.311 for more information.

SCPI Command	[:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:UCI<n>:COMP:ID:PUCCh <value> [:SOURce]:RADio:LTETdd:WAVeform[:ARB]:CCARrier<channel>:UL:TCH:UCI<n>:COMP:ID:PUCCh?
SCPI Example	RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:UCI:COMP:ID:PUCCh "0" RADio:LTETdd:WAVeform:CCARrier1:UL:TCH:UCI:COMP:ID:PUCCh?
Dependencies	Available only when UL CoMP State is On. Read-only otherwise.
Preset	0
State Saved	Yes
Initial S/W Revision	A.20.01